Sliding Hangar Door
Product Description
Technical Data:
| Applicable door opening | W100m*H22m |
| Reserved size on the upper edge of the hole | ≥1000 |
| Reserved size on the side of the hole | ≥door leaf width+500 |
| Working voltage frequency | 380V/50HZ |
| Motor Power | n×1.5-3W（n is the number of the door leafs） |
| Running speed | ~0.17m/s |
| Door thickness | 200-530 |
| Adapt to temperature | -40°C~50°C |
| Wind pressure resistance | 650N/m⊃2; |
| Sound insulation | 23db |
| K | K≤0.8W.m⊃2;.K |
Structure diagram:
1.Door panel:
A.Corrugated steel plate:0.5-0.8mm,powder coated galvanized steel,good anti corrosive performance and easy to install.
B.PU sandwich panel:0.4mm double layer painted steel.Filled with environmental friendly PU foam.Very good heat preservation and noise insulation.
C.Polycarbonate panel:Very good daylighting performance and better thermal insulation performance.
2.Steel Structure:
A.Professional mechanical analysis of steel structure.
B.All materials are hot galvanized.Excellent corrosion resistance.
C.All joints shall be fully welded or bolted with high strength.
3.Guide rails:Ground rail,18-24kg .Top guide rail,150mm-250mm H-Shaped steel.
4.Wheels.Bottom bearing wheel:Conical design,wheels will adjust the position automatically.Top guide rail:Special cylindrical design,the wheels could move up and down to adapt the possible deformation of the door.
5.Motor and controller:"SIEMENS" brand motor with clutch.Variable frequency drive system to realize slow start and stop.
6.Safety photo sensor and alarm light:
7.Limit switch:Photo sensor limit switch to control running limit.More reliable and durable.
Video display